Acrylit
Acrylit G10 is the only plastic laminate combines light diffusion and durability of acrylic with high mechanical strength, especially the impact provides the glass fiber reinforcement; It is made from resin 100 percent acrylic fiber reinforced glass, which allows for excellent light diffusion preventing shadow areas.
details
The best lighting concept to serve the construction industry. It is a thermoformable laminate, Translucent manufactured in a continuous process, under strict quality control ensures the homogeneity of their mechanical and physical properties.
Stabilit is the only company that manufactures this product, thanks to its expertise and technology that distinguish point in all processes. Acrylit G10 is manufactured by a continuous process providing homogeneity to the laminate and uniformity in all dimensions. Through this process, you can manufacture any type of profile, long, width and thickness required by the market, under the international standards ASTM.
- Great light diffusion. Up to 95% brightness!.
- Excellent natural lighting.
- Electric energy saving.
- Gel Coat finish on both sides that provides strength and durability to the sheet.
- UV protection.
- Low replacement cost because of its guaranteed durability.
- Suffers high dilatations.
- Retains its original color longer compared to other products.
- Excellent combination of diffusion and light transmission and weatherability.
Property | Testing method | Unit | Typical value |
PHYSICAL | |||
| Light Transmission | ASTM D-1494 | % | 55.00 |
Light Transmission Loss | ASTM E-903 | ||
0 Hrs. | % | 55.00 | |
1000 Hrs. | % | 51.50 | |
Total loss | % | 7 | |
Light diffusion | ASTM E - 903 – 96 | % | 95.00 |
Yellowness index 3 | ASTM D-1925 | Delta E | 5 |
Commentary | changing Light | ||
Hardness | ASTM D - 2583 | U.B. | 45 - 50 |
Light Transmission Ultra Violet | ASTM E - 903 – 96 | % | 62.70 |
Visible Light Transmission | ASTM E - 903 – 96 | % | 85.00 |
Light Transmission Near Infra Red | ASTM E - 903 – 96 | % | 80.30 |
Foggy | ASTM D - 1003 – 07 | % | 112.31 |
MECÁNICAS | |||
Tensile Strength | ASTM D - 638 | kg/cm2 | 820.00 |
Flexural strength | ASTM D - 790 | kg/cm2 | 1,680.00 |
Izod Impact resistance | ASTM D - 256 | J/m | 370.00 |
THERMAL | |||
Linear thermal expansion coefficient | ASTM D - 696 | *10-5 mm/mm °C | 2.60 |
Thermal conductivity (Factor U) | ASTM C-177 | Wm / m2 °K | 0.23 |
ASTM C - 1363 | BTU / hr ft2 °F | 1.30 | |
Thermal conductivity (Factor R) | ASTM C-177 | m2 °K / Wm | 4.35 |
ASTM C - 1363 | hr ft2 °F / BTU | 0.77 | |
Gain Coefficient Solar Heat | NFRC 201 – 2010 | - | 0.33 |
Shading Coefficient | NFRC 201 – 2010 | - | 0.37 |
Flame behavior / OTHER | |||
Flame Spread | ASTM E - 84 | - | 105 |
Smoke development | ASTM E - 84 | - | 510 |
Engine speed | ASTM D - 635 | in/min. | >2.50 |
Flammability Classification (IBCPC) | ASTM D - 635 | - | CC2 |
Technical details
Quote
gallery
