The manufacturing process has its hallmark in the know about our core insulation design, which provides superior benefits qualityand consistency of our panels. Our product reaches Doneto work installed, easily and quickly, generating savings in building up tiemposde 50%. The design of ribs proveemáxima enhanced resistance and increased capacity spacing.

Length: minimum of 2.00 meters; Maximum of 16.00 meters
Width: 1.00 metro
Thickness: 30, 40, 50, 75, 100, 150 mm
Union Type: Fixing system exposed Overlap
Exterior face: profile KingCrown, the eye embosado, steel pre-painted G-60 or gauge Galvalume® 26, 24, 22. Optional stainless steel 304-2B lime 26.
Interior face: profile Shadowline, the eye embosado, steel pre-painted G-60 or gauge Galvalume® 26 O 28. Optional stainless steel 304-2B lime 26.
Exterior finish: High performance coating poliésterestándar. optional Superpoliéster, Duraplus y PVDF
Interior finish: High performance coating poliésterestándar. optional Superpolíester, Duraplus, Plastisoly PVDF.
Core: Polyisocyanurate foam insulation (THE BRIDGE) condensidad of 34-39 kg/m3
Line colors: Pure white (RAL 9010), White grey (RAL 9002),Aluminum (RAL 9006), Arena Standard. USDA optional Cleanroom

1. The values ​​of the R-value and U-factor are based on ASTM test C518 and ASTM C1363 with average temperature 24 ° C (75°F).
2. The weights of the panels are based on the use of the outside caliber 26 (0.46 mm) and inner bore 26 (0.46 mm) nominal.
3. The panel spacing values ​​are based on negative charges uniformly distrubuidas and an allowable deflection limit of L / 80.
4. The weight values ​​and spacing of the panel are based on the use of the outside caliber 26 and inner bore 26. Please consult the plant to other panel configurations.
5. The spacing values ​​are based on the panel using hidden fixing clips caliber 12 with two screws ¹ / ⁴"-14 by clip. Values ​​not include evaluating the ability of tearing of the screws to the structure.
6. The spacing values ​​panel not include the effects of thermal stresses caused by the temperature differential between the outer face and the inner face of the panel.
7. Please consult the plant should require specific structural analysis for a project.