losacero 36/30
losacero 36/30 It is a system developed for use in metal mezzanines slabs in buildings. Its basic components are: Corrugated sheet with indentations (losacero), Concrete (f´c=200 kg/cm2), mesh (reinforcement temperature) and as optional shear connectors for composite beam effect or to increase the capacity own losacero. By using clear steepness allows larger without requiring temporary propping at the time of placement of the concrete as well as for service stage. Details Features Uses Specifications Downloads Geometric Profile Losacero Sheet 36/30 Covering power: 914.40 mm (36 PLG) Camber: 7.62 cm (3 PLG) finished: Zintro Y Zintro-alum. long: 2.44m minimum and maximum 12m for easy transport. Mezzanines shopping centers, corporate buildings, parking lots, Hotels, hospitals, etc. Corrugated Plate Losacero 36/30 performs three basic functions: a) Working platform in the installation stage, b) Permanent formwork on the stage…
TRD-91.5
TRD 91.5 The trapezoidal corrugated TRD-91.5 is a product made in plant by a stationary roladora from steel roll Ternium Zintro, Ternium Zintro Alum o Ternium Pintro, whose geometry satisfies the dimensions set by the SDI (Steel Deck Institute) for the profile called "Wide Rib" or Type B, and Standard ANSI / SDI-RD1.0. This product is picklable (anidable) and therefore traslapable. Details Features Uses Specifications Downloads Excellent structural capacity Complies with SDI criteria for “Wide Rib” or Type “B” profile. Covering power: 914.4 mm (36″) Available in calibres 20 and 22 Cal. 18 only low technical consultation. lengths from 2440 mm(8’), until 12000 mm (~40′) This product is intended exclusively for use as a substrate resistant (deck) in building "composite decking". It should not be used as product fixing corrugated exposed as waterproofing unless a complete overlap ridge. Also…
TR-100 / 35
TRN 100/35 The TRN-100/35 trapezoidal groove is a product manufactured in the plant using a stationary rolling machine from a Ternium Zintro steel roll., Ternium Zintro Alum o Ternium Pintro. This product is picklable (anidable) and therefore traslapable. Details Features Uses Specifications Downloads Excellent structural and drainage capacity. The recommended minimum slope 6%. Factory Mutual Approval. Dual channel antisyphon. Available in calibres 24 and 26 lengths from 1830 mm (6’), until 12000 mm (~40 ́) For special lengths please contact your sales representative or the Depto.de Product Engineering. This product is intended for use in decks Industrial Buildings where structural strength is required and / or design with low slopes. It also applies in Bodegas y Facades Industrial, horizontal and vertical. 1. (*) Recommended maximum separation between support for a load 100 Kg. alcentro to clear up clear 2 mts. Clear…
losacero 15
losacero 15 losacero 15 is a system developed for use in metal mezzanines slabs in buildings, optimizes the construction time to eliminate the use of traditional falsework, because it allows simultaneously casting the mezzanine and roof, all this translating into savings of time and money in their works. Its basic components are: Corrugated sheet with indentations (Losacero15), Concrete (f´c=200 kg/cm2), welded Mesh (reinforcement temperature) and as optional shear connectors for composite beam effect or to increase the capacity own losacero. This ribbed design provides a more aesthetic appearance and especially its application apparent. Savings volume of concrete is another important factor both by cost and by total weight of the system. It is picklable (anidable) and traslapable and therefore optimizes space in transportation and construction site. Details Features…
losacero 25
losacero 25 losacero 25 is a system developed for use in metal mezzanines slabs in buildings, optimizes the construction time to eliminate the use of traditional falsework, because it allows simultaneously casting the mezzanine and roof, all this translating into savings of time and money in their works. This ribbed design provides a more aesthetic appearance and especially its application apparent. Savings volume of concrete is another important factor both by cost and by total weight of the system. It is picklable (anidable) and traslapable and therefore optimizes space in transportation and construction site. Details Characteristics Uses Loading Properties Discharges Losacero Corrugated Sheet 15 performs three basic functions: a) Working platform in the installation stage, b) Permanent formwork in the step of placing concrete, c) Main reinforcing steel in…
TO-30
TO – 30 They undulate profile (sinusoidal) 100% hard, Extra Rigid made of steel (Full Hard) that provides greater structural strength between supports, offering greater economy in the total cost of the project. By its light weight facilitates transportation and installation maneuvers. Details Characteristics Uses Specifications Downloads Geometric Profile LaminaTO-30 Covering power: 778.40 mm (30.645 PLG) Camber: 1.448 cm (0.57 PLG) finished: Zintro, Zintro-alum y pintro. long: 2.44m minimum and maximum 12m for easy transport. This product is intended for use in rural constructions. It is easy to install on roofs and facades. Manufactured in high hardness steel Due to its lightness it facilitates maneuvers in transportation and installation Minimum slope 20%, maximum slope length 15.0mts Recommended minimum overlap 200mm (7.9″) Dimensional range Available in 28 gauge″ y 32″ Available with a minimum length of 2440mm (8′), 3050mm (10′), 3660mm(12′) Covering power 77.8 cm (30.6″) details…
TR-90
TR – 90 It is a trapezoidal grooved profile manufactured in the plant using a stationary rolling machine from a roll of Ternium Zintro steel., Ternium Zintro Alum o Ternium Pintro, which, due to its large cant, allows it to clear large gaps, which translates into a decrease in the amount of supports. By its configuration, this product is easily stackable (anidable) and overlapping. Details Characteristics Uses Specifications Downloads Geometric Profile TR-90 Sheet Covering power of 9000 mm. (35.433 PLG) Camber: 6.3 cm (2.5 PLG) finished: Zintro, Zintro-alum y pintro. long: 3.05m minimum and 12m maximum for ease of transport. Warehouses and roofing for parking lots. Its low weights per square meter makes this grooving an excellent replacement for its similar asbestos or fiber cement having considerable savings in the support structure.. In ceilings it is recommended in slopes not greater than 25m and slopes not less than 6%. thicknesses…
TO-725
TO – 725 It is a corrugated profile undulate (sonusoidal) by roll-forming from coated steel Ternium Zintro, Ternium Zintro Alum o Ternium Pintro. By its configuration, this product is easily stirrable. Details Characteristics Uses Specifications Downloads Geometric Profile Sheet TO-725 Covering power of 714.6 mm. (28.133 PLG) Camber: 1.905 cm (0.75 PLG) finished: Zintro, Zintro-alum y pintro. long: 1.22m minimum and 12m maximum for ease of transport. Widely applicable on farm roofs and facades, barn, warehouses, households, semicircular covers, silos and cylindrical tanks or curved covers by means of a pre-warping in plan. Colors Standard White, Duraplus Standard White, Ultra white, Standard sand, Duraplus standard sand, Blue King, Standard Military Blue, Silver Poly, Smoke Gray and Janitzio Red. Characteristics Minimum slope 20%, maximum slope length 15.0 mts. Minimum transverse overlap 200 mm (7.9″) This product has application on curved structures by means of a heco plan bend, under request…
TO-100
TO – 100 Previous Next It is a wave profile (sinusoidal) by roll-forming from Ternium Zintro coated steel, Ternium Zintro Alum o Ternium Pintro. It is the only product that has the quality of being warped and used in curved or semicircular ceilings.. Details Characteristics Uses Specifications Downloads Geometric Profile Sheet TO-100. Covering power: Muros 1032.20 mm. (40.637 PLG); covers 952.80 mm (37.511PLG) Camber: 1.905 cm (0.75 PLG) finished: Zintro, Zintro-alum y pintro. long: 1.22m minimum and 12m maximum for ease of transport. This product is intended to be used on Roofs of Industrial Warehouses where structural resistance and/or design with low slopes is required.. It also applies in Bodegas y Facades Industrial, horizontal and vertical. Colors Standard White, Duraplus Standard White, Ultra white, Standard sand, Duraplus standard sand, Blue King, Standard Military Blue, Silver Poly, Smoke Gray and Janitzio Red. Characteristics Minimum slope 20%, maximum slope length…
R-101
Lamina R 101 It is a profile of trapezoidal configuration ribbed plant made by a stationary roladora from a roll of steel Ternium Zintro, Ternium Zintro Alum o Ternium Pintro, It designed to be used as cover fixing exposed. Details Characteristics Uses Load Properties Discharges Covering power of 1008 mm. (39.685 PLG) Camber: 2.46 cm (0.9685 PLG) materials: Galvanized steel, steel Pintro, Aluminum and Stainless Steel. long: 2.44m minimum and maximum 12m for easy transport. Median structural capacity and drainage. • Can be placed upside down in composite decking. • Minimum slope 10% • Overlap minimum transverse 300 mm (~12”) Muros. covers. Coattails of industrial buildings. Bodegas. General construction. NOTES: 1. (*) Recommended maximum separation between support for a load 100 kg to the center of the gap to a gap of 2 mts. Claros 2 or more meters, two concentrated loads are considered. 2. Las…