losacero 36/30
losacero 36/30 It is a system developed for use in metal mezzanines slabs in buildings. Its basic components are: Corrugated sheet with indentations (losacero), Concrete (f´c=200 kg/cm2), mesh (reinforcement temperature) and as optional shear connectors for composite beam effect or to increase the capacity own losacero. By using clear steepness allows larger without requiring temporary propping at the time of placement of the concrete as well as for service stage. Details Features Uses Specifications Downloads Geometric Profile Losacero Sheet 36/30 Covering power: 914.40 mm (36 PLG) Camber: 7.62 cm (3 PLG) finished: Zintro Y Zintro-alum. long: 2.44m minimum and maximum 12m for easy transport. Mezzanines shopping centers, corporate buildings, parking lots, Hotels, hospitals, etc. Corrugated Plate Losacero 36/30 performs three basic functions: a) Working platform in the installation stage, b) Permanent formwork on the stage…
losacero 25
losacero 25 losacero 25 is a system developed for use in metal mezzanines slabs in buildings, optimizes the construction time to eliminate the use of traditional falsework, because it allows simultaneously casting the mezzanine and roof, all this translating into savings of time and money in their works. This ribbed design provides a more aesthetic appearance and especially its application apparent. Savings volume of concrete is another important factor both by cost and by total weight of the system. It is picklable (anidable) and traslapable and therefore optimizes space in transportation and construction site. Details Characteristics Uses Loading Properties Discharges Losacero Corrugated Sheet 15 performs three basic functions: a) Working platform in the installation stage, b) Permanent formwork in the step of placing concrete, c) Main reinforcing steel in…
TRD-91.5
TRD 91.5 The trapezoidal corrugated TRD-91.5 is a product made in plant by a stationary roladora from steel roll Ternium Zintro, Ternium Zintro Alum o Ternium Pintro, whose geometry satisfies the dimensions set by the SDI (Steel Deck Institute) for the profile called "Wide Rib" or Type B, and Standard ANSI / SDI-RD1.0. This product is picklable (anidable) and therefore traslapable. Details Features Uses Specifications Downloads Excellent structural capacity Complies with SDI criteria for “Wide Rib” or Type “B” profile. Covering power: 914.4 mm (36″) Available in calibres 20 and 22 Cal. 18 only low technical consultation. lengths from 2440 mm(8’), until 12000 mm (~40′) This product is intended exclusively for use as a substrate resistant (deck) in building "composite decking". It should not be used as product fixing corrugated exposed as waterproofing unless a complete overlap ridge. Also…
TR-100 / 35
TRN 100/35 The TRN-100/35 trapezoidal groove is a product manufactured in the plant using a stationary rolling machine from a Ternium Zintro steel roll., Ternium Zintro Alum o Ternium Pintro. This product is picklable (anidable) and therefore traslapable. Details Features Uses Specifications Downloads Excellent structural and drainage capacity. The recommended minimum slope 6%. Factory Mutual Approval. Dual channel antisyphon. Available in calibres 24 and 26 lengths from 1830 mm (6’), until 12000 mm (~40 ́) For special lengths please contact your sales representative or the Depto.de Product Engineering. This product is intended for use in decks Industrial Buildings where structural strength is required and / or design with low slopes. It also applies in Bodegas y Facades Industrial, horizontal and vertical. 1. (*) Recommended maximum separation between support for a load 100 Kg. alcentro to clear up clear 2 mts. Clear…
losacero 15
losacero 15 losacero 15 is a system developed for use in metal mezzanines slabs in buildings, optimizes the construction time to eliminate the use of traditional falsework, because it allows simultaneously casting the mezzanine and roof, all this translating into savings of time and money in their works. Its basic components are: Corrugated sheet with indentations (Losacero15), Concrete (f´c=200 kg/cm2), welded Mesh (reinforcement temperature) and as optional shear connectors for composite beam effect or to increase the capacity own losacero. This ribbed design provides a more aesthetic appearance and especially its application apparent. Savings volume of concrete is another important factor both by cost and by total weight of the system. It is picklable (anidable) and traslapable and therefore optimizes space in transportation and construction site. Details Features…