Perfil Geometrico Lamina TR-90

Hiding power 9000 mm. (35.433 PLG)

Camber: 6.3 cm (2.5 PLG)

finished: Zintro, Zintro-alum y pintro.

long: 3.05m minimum and 12m maximum for ease of transport.

Warehouses and roofing for parking lots. Its low weights per square meter makes this grooving an excellent replacement for its similar asbestos or fiber cement having considerable savings in the support structure.. In ceilings it is recommended in slopes not greater than 25m and slopes not less than 6%.

Nominal thicknesses of base steel according to N3 ETP MEXUNI P05 AG Gauges.
Tolerance ¾ ASTM
Theoretical Weights +/- 7%

1. * Recommended maximum separation between support for a load 100 kg in the middle of the class.
2. ** Recommended maximum spacing between supports for two loads of 100 kg to clear thirds.
3. Wind suction loads may be increased by 33% for being accidental load.(Consult local building code)
4. No value exceeds a maximum deflection of L / 240.
5. The properties and load capacity were calculated for an ASTM A-653 grade SS steel. 37 (Fy = 2600 kg/Cm2, Fb= 1560 Kg/Cm2)
6. Important note: Due to its very sturdy structural sheet characteristics, this ribbed is not calculated according to the conventional method of reduced compression areas of the AISI design manual. The load capacities were obtained through load tests also accepted in said manual.
7. Projects must be calculated by an Engineer responsible for it to satisfy the codes, standards and procedures accepted by the construction industry.